Belzona 1391 (Ceramic HT)

A 2-part ceramic filled epoxy coating which provides erosion and corrosion resistance to high temperature equipment operating under immersion up to 120°C (248°F). This solvent-free coating provides excellent resistance to a wide range of aqueous …

RP0
Excluding Tax
Stock Status: 500 pcs

pcs

A 2-part ceramic filled epoxy coating which provides erosion and corrosion resistance to high temperature equipment operating under immersion up to 120°C (248°F). This solvent-free coating provides excellent resistance to a wide range of aqueous solutions, hydrocarbons and process chemicals. It is easy to mix and can be applied using a stiff bristled brush or applicator.

Belzona 1391 (Ceramic HT) can also be used as a high strength structural adhesive for metal bonding and to create irregular load bearing shims where a high temperature material is required.

Key benefits:

Operates at high temperature under immersed conditions

Excellent erosion and corrosion resistance

Reduced health and safety risks as it is solvent-free

High compressive strength

Application and cure at room temperature - no hot work involved

Excellent chemical resistance against a wide range of chemicals

No shrinkage, expansion or distortion

Excellent bonding to many metal surfaces including steel, stainless steel, specialist steels

Applications for Belzona 1391 (Ceramic HT) include:

High temperature coatings for process vessels, distillation columns, heat exchangers, clarifiers and scrubber units operating under immersion

Protecting pumps, valves, hot water tanks and separators from the effects of erosion and corrosion

Protection of pipework from moisture and chemical attack

High strength structural adhesive for metal bonding

Creation of irregular load bearing shims

Key technical data:

Working life at 25°C (77°F) 30 minutes

Time to immersion service at 25°C (77°F) 4 days

Pull off adhesion (D4541 / ISO 4624) 6030 psi (41.58MPa) on blasted mild steel

Coverage rate For service temperatures of 100°C - 120°C (212°F - 248°F)

Practical coverage rate for a 2 coat system:

1st coat 0.39 sq.m. (4.2 sq.ft.) per kilogram

2nd coat 1.00 sq.m. (11.0 sq.ft.) per kilogram

Temperature resistance 120°C (248°F) immersed, 200°C (392°F) dry

Bonds to Steel, stainless steel and other metals

Typical applications High temperature coating of process equipment, bonding and shimming

Unit size 3kg. Pack sizes may vary locally.

Availability* Global

* All products are subject to regional restrictions. Check with your local Distributor for more information

More information:

We rely on cookies to provide our services. By using our services, you agree to our use of cookies.