Belzona 1593

A 2-part hand-applied epoxy coating designed to provide long-term corrosion and chemical resistance to equipment operating in continuous immersion at temperatures up to 160°C (320°F). This coating has a long overcoat window and its cold curing …

RP0
Excluding Tax
Stock Status: 500 pcs

pcs

A 2-part hand-applied epoxy coating designed to provide long-term corrosion and chemical resistance to equipment operating in continuous immersion at temperatures up to 160°C (320°F). This coating has a long overcoat window and its cold curing mechanism with full in service cure reduces downtime and ensures rapid return of equipment to service.

This solvent-free coating is easy to mix and apply without the need for specialist tools, ensuring a simple and safe application in confined areas.

Key benefits:

Outstanding corrosion protection of high temperature equipment, suitable for continuous immersion in water and hydrocarbon mixtures up to 160°C (320°F)

Excellent chemical resistance against a wide range of chemicals including hydrocarbons and amines

2-coat application without the need for flash blasting between coats

Very light colours allowing easy inspection in dark vessels

Application and cure at room temperature - no hot work involved

Solvent-free material allowing it to be safely applied in confined areas

Reduces downtime due to its innovative post-cure mechanism activated at service temperatures - no separate post-cure needed

Withstands steam-out process up to 210°C (410°F) and rapid depressurisation

Excellent adhesion to metal surfaces and high retention of adhesion at elevated temperatures

Applications for Belzona 1593 include:

High temperature epoxy coating for oil and gas production equipment such as separators, flare knock-out vessels and evaporators operating under immersion

Corrosion protection against a variety of chemicals in high temperature equipment including boiler vessels, condensers and heat exchangers

Key technical data:

Working life at 20°C (68°F) 45 minutes

Time to full service at 30°C (68°F) 30 hours

Pull off adhesion (ASTM D4541 / ISO 4624) 3,430 psi (23.7 MPa) on grit blasted steel for 100°C (212°F) cure/ 20°C (68°F) test

Compressive Yield Strength (ASTM D695) 11,460 psi (79.0 MPa) for 100°C (212°F) cure/ 20°C (68°F) test

Atlas Cell Immersion resistance (NACE TM0174) 160°C (320°F) immersed; no rusting or blistering after 6 months

High adhesion to Steel, stainless steel and other metals

Typical applications Epoxy coating for equipment operating at high temperatures under continuous immersion

Unit size 1 kg, 3 kg. Pack sizes may vary locally.

Availability* Global

* All products are subject to regional restrictions. Check with your local Distributor for more information

More information:

We rely on cookies to provide our services. By using our services, you agree to our use of cookies.