Belzona 5851 (HA-Barrier)

A solvent-free, single-component epoxy coating, which cures in contact with hot surfaces and is designed to prevent or protect metal from corrosion under insulation (CUI). Belzona 5851 (HA-Barrier) can be easily applied by brush and does not require …

RP0
Excluding Tax
Stock Status: 500 pcs

pcs

A solvent-free, single-component epoxy coating, which cures in contact with hot surfaces and is designed to prevent or protect metal from corrosion under insulation (CUI). Belzona 5851 (HA-Barrier) can be easily applied by brush and does not require any weighing or mixing.

This heat-activated material can be applied directly onto hot surfaces (70-150°C / 158-302°F) with minimal surface preparation, avoiding production downtime. Once cured, it provides outstanding corrosion protection. Also available is Belzona 1251 (HA-Barrier), a heat-activated epoxy repair composite which can be used in fill pitting and bond equipment among other applications.

Key benefits:

In-situ application to live equipment operating at high temperature with minimal surface preparation

Single pack system, no weighing or mixing required

Reduced health and safety risks as it is solvent-free and no hot work is required

Fast cure allowing equipment to be re-insulated with minimum delay

Excellent corrosion protection

Good chemical resistance against a wide range of chemicals

Excellent adhesion to (even to manually prepared) metals including stainless steel, carbon steel, aluminium, brass and copper

Thermally stable up to 150°C (302°F) in dry conditions

Applications for Belzona 5851 (HA-Barrier) include:

Prevention of corrosion under insulation (CUI)

Long-term corrosion protection of hot pipework and process equipment

In-situ external coating of process vessels during service operating at high temperature avoiding production downtime

Key technical data:

Working life Unlimited *cure will not commence until the product is heated

Time to full cure 100°C (212°F) 2 days

Coverage rate (1kg) Theoretical coverage rate for a 2 coat system:

2.4 sq.m. (25 sq.ft.) per kilogram per coat

Volume capacity (1kg) 476 cm3 (29 cu.in.)

Heat resistance Up to 150°C (302°F)

Heat distortion temperature (tested per ASTM D648) 127°C (261°F) after 7 days cure at 100°C (212°F)

Bonds to Aluminium, copper, steel, stainless steel, cast iron, and other metals

Typical applications Protection against CUI problems, heat activated coating for live process equipment

Unit size 1.5kg, 8kg. Unit sizes may vary locally.

Availability* Global

* All products are subject to regional restrictions. Check with your local Distributor for more information

More information:

We rely on cookies to provide our services. By using our services, you agree to our use of cookies.