Belzona 5892

A 2-part epoxy coating applied by brush or heated airless spray for corrosion protection of metallic surfaces in contact with aqueous solutions at temperatures up to 95°C (203°F). This solvent-free material offers good chemical resistance against a …

RP0
Excluding Tax
Stock Status: 500 pcs

pcs

A 2-part epoxy coating applied by brush or heated airless spray for corrosion protection of metallic surfaces in contact with aqueous solutions at temperatures up to 95°C (203°F).

This solvent-free material offers good chemical resistance against a wide range of chemicals and protects equipment from the effects of corrosion, salt, water and environmental damage. It will cure at ambient temperature without the need for additional heat, eliminating health and safety hazards.

Belzona 5892 exhibits low surface bloom and excellent inter-coat adhesion enabling 2-coat application without the need for frost blasting. It has been formulated in light colours to assist visibility and provide good inspection characteristics in poorly lit vessels.

This material can also be used for the creation of irregular load bearing shims with good electrical insulation characteristics.

Key benefits:

Effectively protects equipment operating under constant immersion up to 95°C (203°F)

Suitable for contact with hot potable water, approved by WRAS and NSF/ANSI 61

Post cures in service

Long-term corrosion resistance

Reduced health and safety risks as it is solvent-free

Easy application by brush or heated airless spray and cure at room temperature - no hot work involved

Two coat system with a long overcoat window

Will outperform conventional glass flake coatings

Good chemical resistance against a wide range of chemicals

Excellent bonding to many surfaces including cast iron, stainless steel, brass, copper, concrete, wood, fiberglass and aluminum

Applications for Belzona 5892 include:

Lining of equipment such as vessels, separators, condensers, evaporators, knockout drums, diffusers and heat exchangers operating at high temperature

Repair of existing equipment linings

Protection of tanks and secondary containment areas from chemicals and the effects of corrosion

Coating of pipelines prone to corrosion damage

Creation of irregular load bearing shims

Key technical data:

Working life at 20°C (68°F) 40 minutes

Time to immersion service at 30°C (86°F) 24 hours

Pull off adhesion (D4541 / ISO 4624) 5500 psi (37.9 MPa) at room temperature on grit blasted steel

Coverage rate Practical coverage rate for a 2 coat system:

3.4 sq.m. (36.5 sq.ft.) per litre per coat

Temperature resistance 95°C (203°F) immersed

Bonds to Most metallic and non-metallic surfaces including cast iron, stainless steel, brass, copper, concrete, wood, fiberglass and aluminium

Typical applications Protection of equipment operating under immersion at high temperatures

Unit size 4 litres and 10 litres. Pack sizes may vary locally.

Availability* Global

* All products are subject to regional restrictions. Check with your local Distributor for more information

Approvals:

NSF/ANSI 61

NSF-ANS-61

WRAS Approved Material

Bureau Veritas logo

More information:

We rely on cookies to provide our services. By using our services, you agree to our use of cookies.